| Last additions - New Zealand |
Tabs on154 viewsThe tabs finish off the transom nicely. There is a slight curve at each edge, so I had to build up the transom in order to give the tabs a flat mounting surface.Apr 10, 2009
|
|
Trim Tab160 viewsThe built up area on the transom to give the tabs a flat mounting area can be clearly seen. I'm very happy with the result, considering I haven't done any fibreglassing for 21 years. I did the painting using my airbrush (Pointless using the spraygun for such a small area), and there are 6 coats of paint - 2 undercoat, 2 primer, 2 topcoat.Apr 10, 2009
|
|
Marc's First Fish154 viewsMarc's first legal sized snapper. It may not look like much, but was over 30cm. He is going to enjoy eating the fillets, and has decided how it will be prepared.Apr 10, 2009
|
|
Sedate251 viewsDoing sedate figure 8's just off Hihi beach while dad takes photos off our balconyJan 10, 2009
|
|
Digging in191 viewsOpen up the throttle, she digs her butt in until the platform is almost awash, lifts her nose into the air, and starts to go.Jan 10, 2009
|
|
Going194 viewsaround 18 knots....The engine is trimmed fully in, the backside has come up, the nose has dropped, and she has come up on to the plane.Jan 10, 2009
|
|
Really going165 viewsUp to cruising speed of 28-30 knots. Later I took her up to 40 knots; she can go faster, but I don't think I can.Jan 10, 2009
|
|
Docked173 viewsThe end of a succesful fishing trip.Jan 10, 2009
|
|
Lou's catch184 viewsA fine, pan-sized snapperJan 10, 2009
|
|
Fish Guts169 viewsAlmost finished getting rid of the unmentionables.Jan 10, 2009
|
|
Vomiting fish....182 viewsScaled, gutted, a final wash-out before going in the oven.Jan 10, 2009
|
|
169 viewsDec 10, 2008
|
|
|
|
Register 